Serving Riverdale, Leslieville & the Danforth(437) 494-0899

Electrician Rapid Toronto · Carlaw Ave

Electrical repairs in Riverdale, Leslieville and the Danforth

When a breaker keeps tripping or half a floor goes dead, we test until we know why. Repairs for the row houses, semis and lofts around Carlaw and the Danforth.

Narrow houses, crowded circuits

Riverdale and Leslieville row houses and semis were wired for a few lights and a radio. A century later, the same narrow houses run kitchens, home offices, air conditioning and laundry, often on circuits that were extended rather than replaced. Most repair calls trace back to one overloaded circuit or one tired connection.

What we fix

  • Breakers that trip under load. We measure the load on the circuit to see whether it is a fault or simply too much on one breaker.
  • Outlets that stopped working. Usually a loose or burnt connection upstream, or a GFCI somewhere else on the circuit.
  • Flickering across the house. Can point to a loose neutral at the panel or the service. We check that first because it affects everything.
  • Buzzing switches and warm cover plates. A sign a connection is failing. Leave the circuit off until it is checked.
  • Shared walls. In semis and row houses we check that nothing is fed from, or feeding, the house next door.

What a repair visit looks like

  1. Describe it. Call or text what stopped working and when. A short video of a flicker helps.
  2. Test. We measure, open the affected boxes and find the cause.
  3. Fix and report. We repair it and tell you plainly if the circuit needs more than a repair.

Old wiring behind the fault? See home rewiring or knob-and-tube replacement.

Repair questions

Why does my breaker trip when the kettle and toaster run?

In many older east end kitchens both share one circuit. Adding a dedicated counter circuit usually solves it.

Is a hot outlet an emergency?

Turn that circuit off at the panel and do not use the outlet until it has been checked. Heat means a connection is breaking down.

Do you do small jobs?

Yes. One outlet or one fixture is a normal call.